Dietrich Injector Units
Dietrich Hybrid II

- Higher GPA than conventional rotary injectors
- Special formed 20″ diameter notched covering
blades provide scooping action to move soil
- Heavy down pressure on covering blades for more soil movement
- Conical blades creates a wider furrow
- Coulter blade swivels reducing side loading
- 6″ Blade rock clearance to prevent breakage
- Cup washers protect all seals
- Rugged design with hi tensile steel for
weight reduction
- 2 coats black enamel baked paint

Dietrich Series 70™

- Attaches to a 4″ x 6″, 6″ x 6″ or 7″ x 7″ tool bar
- No daily greasing – Only end of season shank pivot greasing
- Snap pin adjust coulter – No set screws
- 800# coulter down pressure spring assembly – Most others range from 200 – 350# down pressure
- 22 – 1/2″ diameter coulter – Not 20″
- Auto reset with heavy duty 1400# reset force – Not spring bundle
- 1-1/4″ x 2″ edge bent steel shank
– Not 1″ x 2″
- Narrow 1/2″ sweep shank – Sweeps lift the soil less than 1-1/4″
- Hi carbon, special bar quality, cast steel chisel point sweep with front hi chrome casting and heavy, abrasion-resistant hard surfacing on the wings
- Separately replaceable sweeps & tubes
- Cup washers protect all seals
US Patents: 5865131, 6973884, 8544395, 9226437
Other US Patents Pending
Dietrich Conical Blade Rotary Injector

For Vertical Application
- Spacing from 30″ to 18″
- Fits 6″ x 4″ & 6″ x 6″ Tool Bar
- Conical blade enters the soil in the direction of travel ahead of the spindle and moves soil laterally behind the spindle to widen the opening.
- Heavier down pressure spring
- Coulter swivels reducing side loading
- All service/adjustments accomplished with 1/2″ impact wrench
- 6″ Blade rock clearance to prevent breakage
- Cup washers protect all seals
- Dual roller bearing for longer life, not single row ball bearings
- All hi tensile steel thoughout for weight reduction.
- Weight-forward design to avoid weight transfer from drawbar
- 2 coat black enamel baked paint
Like this:
Like Loading...